In my very limited experience a set of injectors I made with the nozzles
pointing right at the intake valves, the engine was a dog on gas, but ran
well on alcohol. I have been told that down nozzles as used in sprint cars
will not work well on gas. I have run the Plymouth with the nozzles 18
inches from the valve and 4 inches on gas with no observed difference. Don't
know what can be learned from that. Rich Fox
----- Original Message -----
From: "Joel Wolcott" <wolcott_jl@yahoo.com>
To: <john@theromeros.org>
Cc: <land-speed@autox.team.net>
Sent: Saturday, May 21, 2005 02:46 PM
Subject: Re: Fuel Injection Question
> Gasonline - no fuel class for my vehicle - modified
> mini pickup
> --- john@theromeros.org wrote:
> > Joel,
> >
> > What are you going to use for fuel?
> >
> > The answer could be quite different based on
> > gasoline vs. methanol.
> >
> > john
|