9" Ford Pinion (1350 yoke)

["3liter" <saltfever@comcast.net>]

Listers:  I just received a Spicer (clone) number 1350 yoke. I test-fit it
to a standard 28 spline pinion and it would go on only about 1/8"-1/4" and
then bind. I am used to the yoke sliding on and then torqueing down with the
nut. Is it within production tolerance for them to have to be pressed on the
pinion splines? As it is, I can't get it on far enough for the threads to
protrude out to start a nut. -Elon