normal EGT for turbo higher than others
instead of 1340-1400, your likely to have
1500-1600+
Dahlgren looks at these numbers daily
wait for him to chime in
Joe :)
gary baker wrote:
> G'Day
> just recieved my programmable aero instruments and I need some
> parameters to enter like 1.the max temp running up to 3 bar turbo in
> EGT( or large hits of N2O ) methanol is the fuel 2. as above for
> CHT and oil temp and water temp all the instruments have an O/P for
> an alarm and I need to give a max temp for normal running temps so
> if they are exceeded the O/P activates which I,m using to shut down
> motor , fuel and electricial ( they come with a black box data
> recorder and a whole lot of other stuff I dont need ) also what is
> the best location for the EGT probes ie. how far from the exhaust
> ports on the headers there will be one probe for each cylinder as
> the EGT meter is a quad setup and reads each independintly I have
> set 1200 for EGT 360 for CHT 185 for oil and 220 for water and 2.5 "
> for the probes ?? are these inthe ball park temp in deg F oh and
> how do I make a pitot tube for the air speed indicator ??
> Gary (
>
> _________________________________________________________________
> Hot chart ringtones and polyphonics. Go to
>
>http://ninemsn.com.au/share/redir/adTrack.asp?mode=click&clientID=174&referral=Hotmail_taglines_plain&URL=http://ninemsn.com.au/mobilemania/default.asp
>
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|