keep in mind my Toe in changes with air pressure adjustments in the bags...
the lower it goes the less it has....K
----------
> From: Dick J <lsr_man@yahoo.com>
> To: kturk@ala.net; land-speed@autox.team.net
> Subject: Re: Camaro setup
> Date: Friday, February 16, 2001 3:17 PM
>
> Thanks, I'll print this and give it too the front
> end guy.
>
> Dick
>
> --- Keith Turk <kturk@ala.net> wrote:
> > Camaro has 5.9 degrees of caster and the Camber
> > is at 0 I think.... very
> > little toe in at speed..... maybe 1/8th of an
> > inch....
> >
> > K
> >
> > ----------
> > > From: Dick J <lsr_man@yahoo.com>
> > > To: Keith Turk <kturk@ala.net>;
> > land-speed@autox.team.net
> > > Subject: Camaro setup
> > > Date: Friday, February 16, 2001 3:11 PM
> > >
> > > --- Keith,
> > > I know you had your control arms modified, I
> > > remember the comments about "certified
> > welder" or
> > > something like that, but, how much caster are
> > you
> > > running. I'm going to get mine aligned again
> > > next week. I changed out the upper control
> > arm
> > > this time, (which the guy told me was a
> > little
> > > bent but not so bad that he thought it would
> > > hurt) and I'm replacing all bushings with
> > > urethane. I also dropped the rear end down a
> > > bunch and that in itself would be enough to
> > > change the front end caster. I know when I
> > went
> > > through this line of questioning the first
> > time I
> > > got everything from 4 to 22 degrees from
> > > different racers, and each seemed to work for
> > > that car. Since your in a Camaro too, I
> > figured
> > > I'd try to get close to what you run. Do you
> > have
> > > any idea what the standard street setting is
> > for
> > > that?
> > >
> > >
> > >
> > > =====
> > > Dick J
> > > In East Texas
> > > Get personalized email addresses from Yahoo!
> > Mail - only $35
> > > a year! http://personal.mail.yahoo.com/
> > >
>
>
> =====
> Dick J
> In East Texas
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
///
/// land-speed@autox.team.net mailing list
///
|