Cris
Kroil is also sold in spray cans. They also sell silikroil Kroil with
silicone. Painters seem to like Kroil, I think it's silicone free. (Ask
Ed)
Gary
----- Original Message -----
From: "Cris Shearer" <cshearer@tacisp.com>
To: <FastmetalBDF@aol.com>
Cc: <dr.piston@worldnet.att.net>; <popms@thegrid.net>;
<land-speed@autox.team.net>
Sent: Friday, January 05, 2001 9:03 AM
Subject: Re: Rust Busting
> My computer has been in the shop and I just got it back. I noticed your
note on
> unlocking tight bolts etc. Ed and the guys at the Auto Body and Paint
shop use
> stuff called "KANO KROIL"
> Kano Lab, Inc. 1000 So. Thompson Lane, Nashville, TN 37311. Tel:
> 1-615-833-4101. Trouble is you have to buy it by the gallon. Ed didn't
say what
> it cost but just wanted to pass this on.
> Cris
>
> FastmetalBDF@aol.com wrote:
>
> > Thanks, James ...... I' ll have to try some of that ! I used to
use
> > some
> > stuff called " Tasgon ", made by Cabot' s, back in the 50s and early
60s .
> > It was nasty smelling stuff that looked like super dirty, thin motor
oil, but
> > it
> > really was great for rusty nuts n' bolts, etc . I haven' t seen any in
a
> > long
> > time ...... it must have gone to the same place as Bardahl, Wynn' s
> > Friction Proofing Oil, and OilZum CRYSTAL motor oil ......
> > Oh yeah ...... the Speedtimer is RIGHT : Coca Cola used to work
> > pretty well, too ..... I had forgotten all about wiring little juice
cans of
> > it
> > under the rear end housing, and soaking the U - bolts in it overnight !
> > Sounds weird ...... but it worked !
> > Bruce where the temp has warmed up to 20 *
|