I bought a thin open ended wrench off of ebay and did some filing. Took
the switch off easily.
So the next question - what's the thread size? Looks to be 5/8"-13 - 55
degrees. Anyone know for sure?
Cheers,
Bob Haskell
Austin-Healey 3000 roadster registrar
On 8/27/26 18:44, JSARCH wrote:
> I I have uses this 1-3/16 wrench but I can't recall for certain because it
> has been many years since I have had to remove the switch. It is about 1/4"
> thick.
>
> Cheers,
> John
> '62 BT7
>
> -----Original Message-----
> From: Healeys <healeys-bounces@autox.team.net> On Behalf Of Bob Haskell
> Sent: Thursday, August 27, 2026 5:26 AM
> To: Healey List <healeys@autox.team.net>
> Subject: [Healeys] OD switch wrench
>
> Listers,
>
> Anyone know the wrench used to remove the 3rd/4th gear OD switch from the
> center shift gearbox. Appears to be 1-5/32" which is not a common size.
> Thinking of getting a thin 1-1/8" open end wrench and opening it up a bit.
>
> Cheers,
>
> Bob Haskell
> Austin-Healey 3000 roadster registrar
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual donation
> $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|