Seems interesting but non-hardening Hylomar worked for me.
John
-----Original Message-----
From: Healeys <healeys-bounces@autox.team.net> On Behalf Of Bob Spidell via
Healeys
Sent: Monday, October 7, 2024 9:05 PM
To: healeys@autox.team.net
Subject: Re: [Healeys] New OD plug
Helpful, thanks. Please let us know how it works out.
Bob
On 10/7/2024 7:16 PM, Don via Healeys wrote:
> After removing the brass OD drain plug on the 67 BJ8 , very badly leaking
and ordering a replacement one from AHSpares. New design from AHSPARES looks
like it may work . Rather than flat surface to flat surface with a washer
and gasket compound the new design has a groove with a supplied rubber o
ring then the gasket .
>
>
> Should work better.
> Don
>
> Sent from my iPhone
>
_______________________________________________
$12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|