--===============8258187859759640463==
--000000000000747b0a0617c602d9
Content-Transfer-Encoding: quoted-printable
Mike
The original belts were 32 degrees whereas most modern belts are 36,38 and
40. I have not found a UK A-H supplier that can supply the correct item. To
give the best drive without slippage the angle of the belt should be
virtually the same as the pulleys.
There are still New Old Stock belts available if one searches around. Below
is a list of possible belts but be careful about the overall length because
there was more than one dynamo pulley fitted.
Ferodo V150 with the following dimensions: Outside Circumference 47.4
inches, Inside Circumference 47.3 inches Top Width 0.75 Thickness 0.5 Angle
32 degrees inclusive
A near equivalent, and sometimes recommended alternative, is the
Ferodo V104 with an O.C. of 46.1=E2=80=9D. This is rather tight: and may ne=
ed the
dynamo to be partly removed to fit it. Other equivalents are;
Mintex TK 474
Romac C738,
and a later addition Raybestos R289
All the best
On Mon, 6 May 2024 at 08:27, mike brooks via Healeys <healeys@autox.team.ne=
t>
wrote:
> B45 not B-45. Just searched at Gates.com and it came up.
>
> Yahoo Mail: Search, organise, conquer
> <https://mail.onelink.me/107872968?pid=3DNativePlacement&c=3DGlobal_Acqui=
sition_YMktg_315_EmailSignatureGrowth_YahooMail:Search,Organize,Conquer&af_=
sub1=3DAcquisition&af_sub2=3DGlobal_YMktg&af_sub3=3D&af_sub4=3D100000945&af=
_sub5=3DOrganizeConquer__Static_>
>
> On Mon, 6 May 2024 at 5:14, Ray Juncal
> <healeyray@yahoo.com> wrote:
> I get nothing on the "Gates Industrial" site in a search for a B-45 belt.
> Is there a part number or additional information that would help in the
> search?
> Regards
> Raay
>
> On Sunday, May 5, 2024 at 06:30:40 PM PDT, Michael Salter <
> michaelsalter@gmail.com> wrote:
>
>
> Not sure if this helps but thie is an original and it is exactly 3/4" wid=
e
> at the top.
> M
>
> On Sat., May 4, 2024, 6:32 p.m. Michael MacLean, <
> springer.mike51@gmail.com> wrote:
>
> A Gates industrial belt B45 is a very close copy of the original.
> Mike MacLean
>
> On Sat, May 4, 2024 at 1:53=E2=80=AFPM mike brooks via Healeys <
> healeys@autox.team.net> wrote:
>
> The fanbelt for a 100 should be 3/4" wide and 1/2" deep in a V shape. 3/4=
"
> wide (19mm) is not a currently standard metric size. I've just bought a
> replacement belt from one of the usual UK suppliers. It's 22mm wide and
> doesn't sit in the pulleys properly. I then went to another supplier who
> claims to be selling the correct width belt. It turned out to be exactly
> the same 22mm size. I've researched this, and these belts are standard
> modern metric size "C". The belt that came off my 100 ( it had been there
> for at least 20 years and 12000 miles) was a B1130 B43 belt, 17mm wide. I=
t
> sat slightly low in the pulley grooves, but was much more flexible than t=
he
> 22mm belts and was altogether a better fit.
>
> What are others using for their 100 fan belts? Note I don't want to
> convert to narrow belts and pulleys.
>
> Mike
> 56 BN2
>
> Yahoo Mail: Search, organise, conquer
> <https://mail.onelink.me/107872968?pid=3DNativePlacement&c=3DGlobal_Acqui=
sition_YMktg_315_EmailSignatureGrowth_YahooMail:Search,Organize,Conquer&af_=
sub1=3DAcquisition&af_sub2=3DGlobal_YMktg&af_sub3=3D&af_sub4=3D100000945&af=
_sub5=3DOrganizeConquer__Static_>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/springer.mike51@gmail.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyray@yahoo.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com
>
>
--000000000000747b0a0617c602d9
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Mike<div><br></div><div>The original belts were 32 degrees=
whereas most modern belts are 36,38 and 40. I have not found a UK A-H supp=
lier that can supply the correct item. To give the best drive without slipp=
age the angle of the belt should be virtually=C2=A0the same as the pulleys.=
</div><div><br></div><div>There are still New Old Stock belts available if =
one searches=C2=A0around. Below is a list of possible=C2=A0belts but be car=
eful about the overall=C2=A0length because there was more than one dynamo p=
ulley fitted.=C2=A0</div><div>=C2=A0<span style=3D"background-color:transpa=
rent;font-variant-numeric:normal;font-variant-east-asian:normal;font-varian=
t-alternates:normal;font-size:11pt;font-family:Calibri,sans-serif;color:rgb=
(0,0,0);font-weight:700;vertical-align:baseline">Ferodo V150</span><span st=
yle=3D"background-color:transparent;font-variant-numeric:normal;font-varian=
t-east-asian:normal;font-variant-alternates:normal;font-size:11pt;font-fami=
ly:Calibri,sans-serif;color:rgb(0,0,0);vertical-align:baseline"> with the f=
ollowing dimensions: Outside Circumference 47.4 inches, Inside Circumferenc=
e 47.3 inches Top Width 0.75 Thickness 0.5 Angle 32 degrees inclusive=C2=A0=
</span></div><span id=3D"gmail-docs-internal-guid-563a57c0-7fff-707b-707e-4=
9edef64e81b"><p dir=3D"ltr" style=3D"line-height:1.38;margin-top:0pt;margin=
-bottom:10pt"><span style=3D"font-size:11pt;font-family:Calibri,sans-serif;=
color:rgb(0,0,0);background-color:transparent;font-variant-numeric:normal;f=
ont-variant-east-asian:normal;font-variant-alternates:normal;vertical-align=
:baseline">A near equivalent, and sometimes recommended alternative, is the=
=C2=A0</span></p><p dir=3D"ltr" style=3D"line-height:1.38;margin-top:0pt;ma=
rgin-bottom:10pt"><span style=3D"font-size:11pt;font-family:Calibri,sans-se=
rif;color:rgb(0,0,0);background-color:transparent;font-weight:700;font-vari=
ant-numeric:normal;font-variant-east-asian:normal;font-variant-alternates:n=
ormal;vertical-align:baseline">Ferodo V104</span><span style=3D"font-size:1=
1pt;font-family:Calibri,sans-serif;color:rgb(0,0,0);background-color:transp=
arent;font-variant-numeric:normal;font-variant-east-asian:normal;font-varia=
nt-alternates:normal;vertical-align:baseline"> with an O.C. of 46.1=E2=80=
=9D. This is rather tight: and may need the dynamo to be partly removed to =
fit it. Other equivalents are;=C2=A0</span></p><p dir=3D"ltr" style=3D"line=
-height:1.38;margin-top:0pt;margin-bottom:10pt"><span style=3D"font-size:11=
pt;font-family:Calibri,sans-serif;color:rgb(0,0,0);background-color:transpa=
rent;font-weight:700;font-variant-numeric:normal;font-variant-east-asian:no=
rmal;font-variant-alternates:normal;vertical-align:baseline">Mintex TK 474<=
/span></p><p dir=3D"ltr" style=3D"line-height:1.38;margin-top:0pt;margin-bo=
ttom:10pt"><span style=3D"font-size:11pt;font-family:Calibri,sans-serif;col=
or:rgb(0,0,0);background-color:transparent;font-weight:700;font-variant-num=
eric:normal;font-variant-east-asian:normal;font-variant-alternates:normal;v=
ertical-align:baseline">Romac C738,=C2=A0</span></p><p dir=3D"ltr" style=3D=
"line-height:1.38;margin-top:0pt;margin-bottom:10pt"><span style=3D"font-si=
ze:11pt;font-family:Calibri,sans-serif;color:rgb(0,0,0);background-color:tr=
ansparent;font-variant-numeric:normal;font-variant-east-asian:normal;font-v=
ariant-alternates:normal;vertical-align:baseline">and a later addition </sp=
an><span style=3D"font-size:10pt;font-family:"Times New Roman",se=
rif;color:rgb(0,0,0);background-color:transparent;font-weight:700;font-vari=
ant-numeric:normal;font-variant-east-asian:normal;font-variant-alternates:n=
ormal;vertical-align:baseline">Raybestos =C2=A0R289</span></p><p dir=3D"ltr=
" style=3D"line-height:1.38;margin-top:0pt;margin-bottom:10pt"><span style=
=3D"font-size:10pt;font-family:"Times New Roman",serif;color:rgb(=
0,0,0);background-color:transparent;font-weight:700;font-variant-numeric:no=
rmal;font-variant-east-asian:normal;font-variant-alternates:normal;vertical=
-align:baseline"><br></span></p><p style=3D"line-height:1.38;margin-top:0pt=
;margin-bottom:10pt"><span style=3D"font-size:10pt;font-family:"Times =
New Roman",serif;color:rgb(0,0,0);background-color:transparent;font-we=
ight:700;font-variant-numeric:normal;font-variant-east-asian:normal;font-va=
riant-alternates:normal;vertical-align:baseline">All the best</span></p></s=
pan><br class=3D"gmail-Apple-interchange-newline"></div><br><div class=3D"g=
mail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Mon, 6 May 2024 at 08:=
27, mike brooks via Healeys <<a href=3D"mailto:healeys@autox.team.net";>h=
ealeys@autox.team.net</a>> wrote:<br></div><blockquote class=3D"gmail_qu=
ote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,20=
4);padding-left:1ex">B45 not B-45. Just searched at Gates.com and it came u=
p.<br><br><div id=3D"m_-8594337655455759681ymail_android_signature"><a id=
=3D"m_-8594337655455759681ymail_android_signature_link" href=3D"https://mai=
l.onelink.me/107872968?pid=3DNativePlacement&c=3DGlobal_Acquisition_YMk=
tg_315_EmailSignatureGrowth_YahooMail:Search,Organize,Conquer&af_sub1=
=3DAcquisition&af_sub2=3DGlobal_YMktg&af_sub3=3D&af_sub4=3D1000=
00945&af_sub5=3DOrganizeConquer__Static_" target=3D"_blank">Yahoo Mail:=
Search, organise, conquer</a></div> <br> <blockquote style=3D"margin:0px 0=
px 20px"> <div style=3D"font-family:Roboto,sans-serif;color:rgb(109,0,246)"=
> <div>On Mon, 6 May 2024 at 5:14, Ray Juncal</div><div><<a href=3D"mail=
to:healeyray@yahoo.com" target=3D"_blank">healeyray@yahoo.com</a>> wrote=
:</div> </div> <div style=3D"padding:10px 0px 0px 20px;margin:10px 0px 0px;=
border-left:1px solid rgb(109,0,246)"> <div id=3D"m_-8594337655455759681yiv=
0847672190"><div><div style=3D"font-family:"Helvetica Neue",Helve=
tica,Arial,sans-serif;font-size:16px"><div></div>
<div dir=3D"ltr">I get nothing on the "Gates Industrial" =
site in a search for a B-45 belt. Is there a part number or additional info=
rmation that would help in the search?</div><div dir=3D"ltr">Regards <br cl=
ear=3D"none"></div><div dir=3D"ltr">Raay<br clear=3D"none"></div><div><br c=
lear=3D"none"></div>
=20
</div><div id=3D"m_-8594337655455759681yiv0847672190ydpf0648f27yaho=
o_quoted_5257061417">
<div style=3D"font-family:"Helvetica Neue",Helvetica,=
Arial,sans-serif;font-size:13px;color:rgb(38,40,42)">
=20
<div id=3D"m_-8594337655455759681yiv0847672190yqt51458"><di=
v>
On Sunday, May 5, 2024 at 06:30:40 PM PDT, Michael =
Salter <<a href=3D"mailto:michaelsalter@gmail.com"; target=3D"_blank">mic=
haelsalter@gmail.com</a>> wrote:
</div>
<div><br clear=3D"none"></div>
<div><br clear=3D"none"></div>
=20
=20
<div><div id=3D"m_-8594337655455759681yiv0847672190ydpf0648=
f27yiv0677184977"><div><div>Not sure if this helps but thie is an original =
and it is exactly 3/4" wide at the top.<div>M</div></div><br clear=3D"=
none"><div><div id=3D"m_-8594337655455759681yiv0847672190ydpf0648f27yiv0677=
184977yqtfd75158"><div dir=3D"ltr">On Sat., May 4, 2024, 6:32 p.m. Michael =
MacLean, <<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D=
"mailto:springer.mike51@gmail.com"; target=3D"_blank">springer.mike51@gmail.=
com</a>> wrote:<br clear=3D"none"></div></div><blockquote style=3D"margi=
n:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex=
"><div id=3D"m_-8594337655455759681yiv0847672190ydpf0648f27yiv0677184977yqt=
fd56520"><div dir=3D"ltr"><div>A Gates industrial belt B45 is=C2=A0 a very =
close copy of the original.</div><div>Mike MacLean<br clear=3D"none"></div>=
</div><br clear=3D"none"><div><div dir=3D"ltr">On Sat, May 4, 2024 at 1:53=
=E2=80=AFPM mike brooks via Healeys <<a rel=3D"nofollow noopener norefer=
rer" shape=3D"rect" href=3D"mailto:healeys@autox.team.net"; target=3D"_blank=
">healeys@autox.team.net</a>> wrote:<br clear=3D"none"></div><blockquote=
style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);p=
adding-left:1ex">The fanbelt for a 100 should be 3/4" wide and 1/2&quo=
t; deep in a V shape. 3/4" wide (19mm) is not a currently standard met=
ric size. I've just bought a replacement=C2=A0 belt from one of the usu=
al UK suppliers. It's 22mm wide and doesn't sit in the pulleys prop=
erly. I then went to another supplier who claims to be selling the correct =
width belt. It turned out to be exactly the same 22mm size. I've resear=
ched this, and these belts are standard modern metric size "C". T=
he belt that came off my 100 ( it had been there for at least 20 years and =
12000 miles) was a B1130 B43 belt, 17mm wide. It sat slightly low in the pu=
lley grooves, but was much more flexible than the 22mm belts and was altoge=
ther a better fit.<div><br clear=3D"none"></div><div>What are others using =
for their 100 fan belts? Note I don't want to convert to narrow belts a=
nd pulleys.</div><div><br clear=3D"none"></div><div>Mike</div><div>56 BN2<b=
r clear=3D"none"><br clear=3D"none"><div id=3D"m_-8594337655455759681yiv084=
7672190ydpf0648f27yiv0677184977m_-2725400356023942407m_1797420552011230604y=
mail_android_signature"><a rel=3D"nofollow noopener noreferrer" shape=3D"re=
ct" id=3D"m_-8594337655455759681yiv0847672190ydpf0648f27yiv0677184977m_-272=
5400356023942407m_1797420552011230604ymail_android_signature_link" href=3D"=
https://mail.onelink.me/107872968?pid=3DNativePlacement&c=3DGlobal_Acqu=
isition_YMktg_315_EmailSignatureGrowth_YahooMail:Search,Organize,Conquer&am=
p;af_sub1=3DAcquisition&af_sub2=3DGlobal_YMktg&af_sub3=3D&af_su=
b4=3D100000945&af_sub5=3DOrganizeConquer__Static_" target=3D"_blank">Ya=
hoo Mail: Search, organise, conquer</a></div></div>________________________=
_______________________<br clear=3D"none">
f=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.team.net=
/donate.html</a><br clear=3D"none">
<br clear=3D"none">
Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D"htt=
p://www.team.net/pipermail/healeys" target=3D"_blank">http://www.team.net/p=
ipermail/healeys</a> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect"=
href=3D"http://autox.team.net/archive/healeys"; target=3D"_blank">http://au=
tox.team.net/archive/healeys</a><br clear=3D"none">
<br clear=3D"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D"mailto:Heale=
ys@autox.team.net" target=3D"_blank">Healeys@autox.team.net</a><br clear=3D=
"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D"http://autox=
.team.net/mailman/listinfo/healeys" target=3D"_blank">http://autox.team.net=
/mailman/listinfo/healeys</a><br clear=3D"none">
<br clear=3D"none">
href=3D"http://autox.team.net/mailman/options/healeys/springer.mike51@gmail=
.com" target=3D"_blank">http://autox.team.net/mailman/options/healeys/sprin=
ger.mike51@gmail.com</a><br clear=3D"none">
<br clear=3D"none">
</blockquote></div>
_______________________________________________<br clear=3D"none">
f=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.team.net=
/donate.html</a><br clear=3D"none">
<br clear=3D"none">
Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D"htt=
p://www.team.net/pipermail/healeys" target=3D"_blank">http://www.team.net/p=
ipermail/healeys</a> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect"=
href=3D"http://autox.team.net/archive/healeys"; target=3D"_blank">http://au=
tox.team.net/archive/healeys</a><br clear=3D"none">
<br clear=3D"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D"mailto:Heale=
ys@autox.team.net" target=3D"_blank">Healeys@autox.team.net</a><br clear=3D=
"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" href=3D"http://autox=
.team.net/mailman/listinfo/healeys" target=3D"_blank">http://autox.team.net=
/mailman/listinfo/healeys</a><br clear=3D"none">
<br clear=3D"none">
rect" href=3D"http://autox.team.net/mailman/options/healeys/michaelsalter@g=
mail.com" target=3D"_blank">http://autox.team.net/mailman/options/healeys/m=
ichaelsalter@gmail.com</a><div id=3D"m_-8594337655455759681yiv0847672190ydp=
f0648f27yiv0677184977yqtfd43448"><br clear=3D"none">
<br clear=3D"none">
</div></blockquote></div><div id=3D"m_-8594337655455759681yiv0847672190ydpf=
0648f27yiv0677184977yqtfd76222">
</div></div></div><div id=3D"m_-8594337655455759681yiv0847672190ydpf0648f27=
yqtfd58250">_______________________________________________<br clear=3D"non=
e">Support Team.Net <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" =
href=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.team.=
net/donate.html</a><br clear=3D"none">Suggested annual donation=C2=A0 $12.7=
5<br clear=3D"none"><br clear=3D"none">Archive: <a rel=3D"nofollow noopener=
noreferrer" shape=3D"rect" href=3D"http://www.team.net/pipermail/healeys"; =
target=3D"_blank">http://www.team.net/pipermail/healeys</a> <a rel=3D"nofol=
low noopener noreferrer" shape=3D"rect" href=3D"http://autox.team.net/archi=
ve/healeys" target=3D"_blank">http://autox.team.net/archive/healeys</a><br =
clear=3D"none"><br clear=3D"none"><a rel=3D"nofollow noopener noreferrer" s=
hape=3D"rect" href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Heal=
eys@autox.team.net</a><br clear=3D"none"><a rel=3D"nofollow noopener norefe=
rrer" shape=3D"rect" href=3D"http://autox.team.net/mailman/listinfo/healeys=
" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br c=
lear=3D"none"><br clear=3D"none">Unsubscribe/Manage: <a rel=3D"nofollow noo=
pener noreferrer" shape=3D"rect" href=3D"http://autox.team.net/mailman/opti=
ons/healeys/healeyray@yahoo.com" target=3D"_blank">http://autox.team.net/ma=
ilman/options/healeys/healeyray@yahoo.com</a><br clear=3D"none"><br clear=
=3D"none"></div></div></div>
</div>
</div></div></div> </div> </blockquote>____________________________=
___________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <a href=3D"h=
ttp://autox.team.net/archive/healeys" rel=3D"noreferrer" target=3D"_blank">=
http://autox.team.net/archive/healeys</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Healeys@autox.t=
eam.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
s/ah100tech@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.te=
am.net/mailman/options/healeys/ah100tech@gmail.com</a><br>
<br>
</blockquote></div>
--000000000000747b0a0617c602d9--
--===============8258187859759640463==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============8258187859759640463==--
|