--===============5766969990420558784==
--0000000000004d788005c274a859
Bob,
Where are your lifting points on your Healey with the QuickJack?
Elton
On Sat, May 15, 2021 at 11:09 PM Bob Spidell <bspidell@comcast.net> wrote:
> As the late Mr. Jobs would say: "One more thing:"
>
> The QJ has some specific maintenance instructions. All the pivot points
> need to be kept lubed--they recommend white lithium grease--but there are
> no zerks, just holes in the tubes. I bought a pistol grip grease gun and a
> few tubes of WL grease, plus a tapered nozzle to inject the grease; it's
> messy and wasteful, but the grease gets where it needs to be. Also, there
> is an air cylinder on each to assist lowering; I noticed when I got my car
> up on the QJ and put jack stands under the rear springs and front A-arms to
> relieve the springs the QL would not completely lower from fully extended
> without weight on them. I think the manual says they are not designed to
> self-lower until they're just a few inches off the ground. The air
> cylinders spec 50psi with the QJ lowered IIRC (RTFM).
>
> Bob
>
> On 5/14/2021 5:55 PM, i erbs via Healeys wrote:
>
> I have one. My Sprite had no issues with 5k jack
> Have not put my big healey on it yet, but I just found my bag or rubber
> blocks so I can gsin clearance of the exhaust.
> Will do so after my 2500 mile rt to Conclave.
>
> Ira Erbs
> 1959 AH 100-6
> 1967 MGB
> Milwaukie, OR
>
> On Thu, May 13, 2021, 7:56 PM Elton S via Healeys <healeys@autox.team.net>
> wrote:
>
>> Fellow Listers,
>> Any of you have a QuickJack car lift? I'd like your opinion of what you
>> think of it, either the 5000# or the 7000#. Is it suitable for lifting a
>> Healey?
>> Thanks in advance,
>> Elton
>>
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eps2660@gmail.com
>
>
--0000000000004d788005c274a859
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Bob,<div>Where are your lifting points on your Healey with=
the QuickJack?</div><div>Elton</div></div><br><div class=3D"gmail_quote"><=
div dir=3D"ltr" class=3D"gmail_attr">On Sat, May 15, 2021 at 11:09 PM Bob S=
pidell <<a href=3D"mailto:bspidell@comcast.net">bspidell@comcast.net</a>=
> wrote:<br></div><blockquote class=3D"gmail_quote" style=3D"margin:0px =
0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
=20
=20
=20
<div>
As the late Mr. Jobs would say: "One more thing:"<br>
<br>
The QJ has some specific maintenance instructions. All the pivot
points need to be kept lubed--they recommend white lithium
grease--but there are no zerks, just holes in the tubes.=C2=A0 I bought=
a
pistol grip grease gun and a few tubes of WL grease, plus a tapered
nozzle to inject the grease; it's messy and wasteful, but the greas=
e
gets where it needs to be. Also, there is an air cylinder on each to
assist lowering; I noticed when I got my car up on the QJ and put
jack stands under the rear springs and front A-arms to relieve the
springs the QL would not completely lower from fully extended
without weight on them. I think the manual says they are not
designed to self-lower until they're just a few inches off the
ground. The air cylinders spec 50psi with the QJ lowered IIRC
(RTFM).<br>
<br>
Bob<br>
<br>
<div>On 5/14/2021 5:55 PM, i erbs via
Healeys wrote:<br>
</div>
<blockquote type=3D"cite">
=20
<div dir=3D"auto">I have one. My Sprite had no issues with 5k jack=C2=
=A0
<div dir=3D"auto">Have not put my big healey on it yet, but I just
found my bag or rubber blocks so I can gsin clearance of the
exhaust.</div>
<div dir=3D"auto">Will do so after my 2500 mile rt to Conclave.<br>
<br>
<div dir=3D"auto">Ira Erbs<br>
1959 AH 100-6<br>
1967 MGB<br>
Milwaukie, OR</div>
</div>
</div>
<br>
<div class=3D"gmail_quote">
<div dir=3D"ltr" class=3D"gmail_attr">On Thu, May 13, 2021, 7:56 PM
Elton S via Healeys <<a href=3D"mailto:healeys@autox.team.net"=
target=3D"_blank">healeys@autox.team.net</a>>
wrote:<br>
</div>
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex=
;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir=3D"ltr">Fellow Listers,
<div>Any of you have a QuickJack car lift? I'd like your
opinion of what you think of it, either the 5000# or the
7000#. Is it suitable for lifting a Healey?</div>
<div>Thanks in advance,</div>
<div>Elton</div>
</div>
<br>
</blockquote>
</div>
</blockquote>
<br>
</div>
_______________________________________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys" rel=3D"noreferre=
r" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <a href=3D"h=
ttp://autox.team.net/archive" rel=3D"noreferrer" target=3D"_blank">http://a=
utox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net" target=3D"_blank">Healeys@autox.t=
eam.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys" rel=3D"noreferre=
r" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
s/eps2660@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team=
.net/mailman/options/healeys/eps2660@gmail.com</a><br>
<br>
</blockquote></div>
--0000000000004d788005c274a859--
--===============5766969990420558784==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============5766969990420558784==--
|