Wow! Those slides are pretty nasty; was that car submerged for a couple
decades? I probably would have sprung for new if they were that bad.
Sorry about the bad info on the bolt size. I think it was wishful
thinking; 5/16" wouldn't be so easily worn and/or stripped.
On 12/31/2020 11:21 AM, Perry Small via Healeys wrote:
> Simon
> Bobs info is pretty good. Bolts are 1/4-24 unf and they have a round flat
> head. Originally resistance welded in place.
> Second photo is where the pins that have to be removed are located.
> There is a set of ball bearings that you should locate before taking the
> slides apart. The ball bearings will probably be worn or rusted so find
> suitable replacements and reinstall in the original locations. Need more just
> ask.
> Perry
>
>
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|