Output fuel fitting on MOSS tank is same as original only problem now is damage
to tank from some shipping mishap
Tim Davis BN7
----- Original Message -----
From: Larry Wendland <bighealey3k at aim.com>
To: tld6008 at mchsi.com
Cc: healeys at autox.team.net
Sent: Fri, 03 Nov 2017 00:33:39 -0400 (EDT)
Subject: Re: [Healeys] Fuel Tank
Tim, He answered your question about the pickup screen but not about the flared
end on the "discharge fitting" or "outlet fitting"
Larry
'67BJ8.
-----Original Message-----
From: Tim Davis BN7 <tld6008 at mchsi.com>
To: Tim Davis BN7 <tld6008 at mchsi.com>
Cc: 'healeys' <healeys at autox.team.net>
Sent: Thu, Nov 2, 2017 5:19 pm
Subject: Re: [Healeys] Fuel Tank
FYI, Just heard back from Moss Motors, reply below
Hello Tim.
?
My name is Blaine Graham. I?m part of the Moss Technical Support Team.
?
Thanks for a great question.
?
I got one of these from the warehouse. With the baffles, I was blind. Then,
common sense got a hold of me. This tank is made for us. I got a set of the
drawings and looked. Bingo!
?
Yes. There is an inlet filter at the bottom of the sump tube.
?
Mystery solved.
?
Have a safe weekend.
?
BPG
?
Blaine Graham
Tech Services
Moss Motors, LTD.
805.679.7237
grahamb at mossmotors.com
Tim Davis BN7
----- Original Message -----
From: Tim Davis BN7 <tld6008 at mchsi.com>
To: 'healeys' <healeys at autox.team.net>
Sent: Thu, 02 Nov 2017 12:04:30 -0400 (EDT)
Subject: [Healeys] Fuel Tank
Anyone know if the new steel tank from Moss has a screen or such on the pick-up
tube? After all the fuss getting my odd ball tank ready to install I find the
tank discharge fitting has no bevel to match the fuel line. It has the correct
thread but the end is just square cut.
Tim Davis BN7
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|