Michael--
Thanks for the info and I went with 75/50.
Best--Michael
On Sat, Oct 14, 2017 at 10:16 AM, Michael Salter <michael.salter at gmail.com>
wrote:
> They look like good numbers to me but be careful on th CR bolts. I have
> replaced a number that were obvoiusly stretched.
> Would it be possible to check for stretch as you torqued them? I never
> have tried.
> M
> ------------------------------
> *From:* Healeys <healeys-bounces at autox.team.net> on behalf of Michael
> Oritt <michael.oritt at gmail.com>
> *Sent:* Saturday, October 14, 2017 9:43:54 AM
> *To:* Austin Healey
> *Subject:* [Healeys] Torque settings, continued
>
> An archive/online search showed suggestions of 50 & 55 ft/lbs for the CR
> nuts and 75 ft/lbs for the Main nuts. They sound reasonable but I really
> would like to get this right the first time.
>
> Best--Michael Oritt
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171014/a508a1bb/attachment.html>
|