healeys
[Top] [All Lists]

[Healeys] Starter motor query

Subject: [Healeys] Starter motor query
From: coudesluijs at chello.nl (Oudesluys)
Date: Mon, 14 Aug 2017 13:50:19 +0200
References: <CAKv9UdQEYs4c56Gw_aMuA7m_2J2kSbJDu5xev_KKKeeH0DYhWQ@mail.gmail.com>
Probably the starter relay/solenoid. The contact points may have burned 
in some degree. If you can dismantle the starter relay you may be able 
to clean the points or if they are heavily pitted you can often fill in 
the holes in the copper with silver solder and grind/file and polish the 
points flat. Make sure the faces of the points make contact over the 
entire surface. I did this many a time years ago when the money was tight.
If you cannot dismantle the relay or if you have no possibility to 
solder fit a new one.
Another less likely cause may be a sticking inertia gear on the starter 
motor shaft. In that case the starter motor will turn over but the 
inertia gear does not engage the starter ring gear. Try squirting some 
WD40 on the inertia gear and shaft and see if that helps. If so 
dismantle the starter motor or if possible the inertia gear assembly 
only and clean thoroughly using brake cleaner. Lubricate the inertia 
gear and shaft by rubbing some graphite/molybdenium powder on the shaft. 
/*NO*/ oil or grease as this will worsen the problem in due course as it 
attracts dirt.
Kees Oudesluijs


Op 14-8-2017 om 12:36 schreef Paul Leeks:
> Hi all
>
> I having a bit of trouble starting the Healey.
>
> When I press the starter button, I just get the dull click which is 
> then followed by a clunk when I release the button. Eventually the car 
> starts, but it usually takes about five or six goes.  Apart from being 
> a bit annoying, I'm worried that I may be doing damage to the starter 
> motor?
>
> The battery is fully charged and I have removed, cleaned and 
> re-tightened all the connections to the battery, relay switch and 
> starter motor.  (During which I inadvertently shorted the two heavy 
> duty cables that connect to the relay which did turn the engine over 
> ... I then remembered to disconnect the battery :-)
>
> Any thoughts on what I should try next?
>
> Many thanks
>
> Paul Leeks
> BN4
>
> EMAIL DISCLAIMER
> Any opinions expressed in this email are those of the individual and 
> not necessarily those of Glasgows.It is intended only for the 
> person(s) to whom it is addressed and may contain privileged and/or 
> confidential information. Accordingly, the copying, dissemination, 
> distribution or use of this message to any other person may constitute 
> a breach of civil or criminal law. Please notify the sender 
> immediately if you have received this email by mistake and delete it 
> from your system. Glasgows is a trading style of R Glasgow & 
> Associates Public Relations Limited. Registered in England & Wales No. 
> 2257022.
>
> *
> *
>
> EMAIL DISCLAIMER
> Any opinions expressed in this email are those of the individual and 
> not necessarily those of Glasgows. It is intended only for the 
> person(s) to whom it is addressed and may contain privileged and/or 
> confidential information. Accordingly, the copying, dissemination, 
> distribution or use of this message to any other person may constitute 
> a breach of civil or criminal law. Please notify the sender 
> immediately if you have received this email by mistake and delete it 
> from your system. Glasgows Limited is registered in England & Wales 
> No. 2257022.
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs 
> at chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170814/10c36c91/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>