healeys
[Top] [All Lists]

[Healeys] Replacing Hypoid Axle Grease Seal

Subject: [Healeys] Replacing Hypoid Axle Grease Seal
From: austin.healey at gmail.com (Chris Dimmock [Healey])
Date: Thu, 27 Apr 2017 00:18:23 +0000
References: <43132867524e4ab5b9a8694c6a4acf5c@nafcmb26.exchange.ford.com>
Hi Dan,
If you have a spare axle, put it on the hub "backwards" so the axle shaft
sticks out, put a small block of wood on the end of the axle tube (to
protect it and start the bearing moving) and put the nuts back on the wheel
studs and use it as a puller. With the evenly spaced wheel studs, you can
pull the hub off evenly.
Don't use those tiny brake drum locators.
And if one of your mates breaks an axle, keep the hub end flange for this
job, especially if you have a narrow garage. :-)
Best
Chris

On Thu., 27 Apr. 2017 at 8:42 am, Corning, Dan (D.C.) <dcorning at ford.com>
wrote:

> I am trying to remove the rear axle hub and wheel bearing to replace the
> oil seal located behind them.  After removing the axle shaft, retaining nut
> and lock washer, the photo shows the hub and bearing.
>
>
>
> The inner race of the bearing seems to have an interference fit with the
> axle housing.  Can anyone tell me the proper method to remove the hub?  Can
> I use two long ? inch bolts in the threaded holes in the photo to ?push?
> the hub out and then use an appropriate sized bearing driver to reinstall?
>
>
>
> Best,
>
>
> Dan Corning
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170427/744e69ed/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>