healeys
[Top] [All Lists]

[Healeys] SU carb reamer needed

Subject: [Healeys] SU carb reamer needed
From: bspidell at comcast.net (Bob Spidell)
Date: Mon, 23 Jan 2017 11:02:08 -0800
References: <CAPTa0B5kr7CWvyZdk=WdcJPyp726SDO+5sZ84d2xpStEqREmeQ@mail.gmail.com>
I don't have a reamer, but many moons ago I sent HD8 carb bodies to 
Apple Hydraulics for installation of new bushes--std. size IIRC--and 
throttle shafts (I think the bushes were undersize then reamed, but not 
sure).  Was happy with result, service and turnaround time (NFI--but if 
Apple wants to give me a kickback I'll take it).  Don't know if WW Auto 
(Peter Caldwell) does this, but they'd be a good bet if they do, too.

If you go oversize, will the shafts still fit the other hardware 
(linkages, etc.)?

bs


On 1/23/2017 9:14 AM, Michael Oritt wrote:
> I have H6 carbs on my 100 Le Mans and the 5/16" throttle shafts are 
> loose.  I would like to go ream out the bodies and go to the oversized 
> .320" throttle shafts.  Moss wants $270.00 for the reaming tool and I 
> do not anticipate I will need to do this job again during my 
> lifetime.  Does anyone have one of these they would be willing to loan 
> or rent?
>
> Best--Michael Oritt
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170123/47277d7f/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>