healeys
[Top] [All Lists]

[Healeys] New steering worm gear

Subject: [Healeys] New steering worm gear
From: michaelsalter at gmail.com (Michael Salter)
Date: Mon, 16 Jan 2017 09:35:13 -0500
References: <CAKkXjqMH_9kQHpomw7mZMHeLYE=++1xcNBT9r-kHPJN8L_SPiQ@mail.gmail.com>
Hi Richard,

Yes the cam is held onto the column by the end being "swaged" over ...This
is how I get them off.
[image: Inline image 1]
There is  steel plug on the end of the puller's forcing screw that is about
0.020" larger than the hole in the column.
Looks like this when removed. The plug is still in place here.
[image: Inline image 2]
The triangular plate that the puller is pulling on (actually a home made
mini flywheel puller) has a hole in it about 0.050" larger than the column
itself.
Once the new cam is installed I just put 3 small TIG welds to replace the
swage. The swage is just to prevent someone pulling up on the steering
wheel and sliding the cam off the column.
Michael S

On Sun, Jan 15, 2017 at 8:47 PM, richard mayor <boyracer466 at gmail.com>
wrote:

> I just purchased a new steering worm gear for my BT7.  Any tips on
> removing the old gear and attaching the new one?  I appears that the end of
> the shaft is swaged at the lower end of the gear.  If I grind this swaged
> area out in order to remove the old gear, will I then have enough shaft
> left to swage it again with the new gear.
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/michaelsalter at gmail.com
>
>
>


-- 
*If you can't fix it with a hammer, you've got an electrical problem.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170116/e1a61e49/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 2014553 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170116/e1a61e49/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 2348774 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170116/e1a61e49/attachment-0003.jpeg>

<Prev in Thread] Current Thread [Next in Thread>