Charlie: Once you have the float dropping into the well - in my case,
oriented toward the front of the car - if there is still error you can try
fine tuning it by bending the float arm.
(The Other) Len
Fairfield, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
From: "Charlie Schott" <schottc@knology.net>
To: "Steve B. Gerow" <steveg@abrazosdata.com>; <healeys@autox.team.net>
Sent: Tuesday, August 25, 2015 11:04 AM
Subject: Re: [Healeys] Gas Gauge
> When the gas gauge on my 1960 BT7 reads 1/4, I'm out of gas. Can the
> sending unit or the gauge be adjusted? Thanks.
>
> Regards,
>
> Charlie Schott
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/schottc@knology.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/thehartnetts@earthlink.net
>
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|