Listers,
I would greatly appreciate any wisdom from you listers to enable me to
unfreeze a stuck engine. There is no apparent mechanical problem other
than friction to overcome internally, as far as I can tell. The engine
has not been rotated for several years, which is my fault. I have poured
in small amounts of a concoction of marvel mystery oil, WD 40, kerosene
and mineral oil through the open spark plug holes and am currently
waiting about a week to see if I can break the friction free by turning
the crank nut using a socket and big breaker bar. I think that I can
also apply moderate judicious force against the large gear teeth adjacent
to the starter motor which is currently removed, to help rotate the
crank. Other that, I have no other current options yet devised. And
yes, the transmission is in the neutral position.
I have also thought about using compressed air pressure against the
pistons to possibly drive the rod down to aid in rotating the crank, but
so far, it is just a guess.
Thank you for any and all suggestions,
Bob in Bellflower, CA.
____________________________________________________________
Want to place your ad here?
Advertise on United Online
http://thirdpartyoffers.juno.com/TGL3141/53f14e6e2eb054e6e30edst03vuc
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|