Thanks Mike,
I'll try that.
On Aug 4, 2014 8:01 AM, "Michael" <michael.salter@gmail.com> wrote:
> Mike try running it up without the operating valve, ball, spring and cap
> in place.
> A good volume of oil should spill out of the hole.
> That will prove the pump.
> The next step is to do a pressure test.
> Michael S
> BN1 #174
> ------------------------------
> From: Mike Tobin <ahbt71@gmail.com>
> Sent: b8/b4/b2014 6:49 AM
> To: healeys@autox.team.net
> Subject: [Healeys] OD Bench Test Fail
>
> Finally got the transmission back together and mated to the OD. Spun them
> up on test jig and got zero oil pressure. Electrics work fine, but I'm
> not getting any reading at all on the pressure .gauge. I'm pretty sure
> the plunger is riding on the cam (I heard it click into place when I
> removed the string). I'd rebuild the OD some years ago and it's been
> sitting patiently waiting for me to get back to it.
> Any suggestions before I go and dismantle the whole ting again?
> Cheers,
> Mike Tobin
> Pepperell, MA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|