swapped a gear pump for a rotary today in a bt7. could not get oil pressure at
all, even though the pump would throw oil a few feet in the air using a drill.
checked make sure pump shaft was turning, primed pump with oil through valve
train oil banjo, still no go. did not do the vaseline or grease routine as i
have never had to do it before. could i be missing anything obvious that would
keep it from pumping oil. will do the vaseline trick and see what happens, but
the pump sure did pump good just sitting in a pan of oil.
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|