Call Pertronix and ask for Carl in customer support. He's very helpful, and
there's a chance they've encountered this situation before.
Bob
--------------------------------
Bob Spidell - San Jose, CA
----- Original Message -----
The fit is about the base plate, not the cap. If it works, it'll have to
be the AH one, hope it fits under the cap. It should, the rotor height is
the same so you should be ok.
On Tuesday, June 11, 2013, Dave Murphy wrote:
> I use a Triumph TR6 style distributor cap (Moss # 560-145) on my negative
> ground BJ8. I want to buy a spare Pertronix Igniter Electronic Ignition to
> carry with me to Charlevoix Conclave.
>
>
>
> Should I buy the one made for the Triumph, Moss # 222-395 which says it
> fits a
> negative ground 22 D6 distributor hoping it will fit on the BJ8 shaft &
> plate;
> or should I buy the one made for the negative ground Austin Healey 3000,
> Moss
> # 222-415 which says it fits a negative ground Lucas 23 and 25 D6
> distributors
> hoping it can fit under the TR6 cap?
>
>
>
> Unfortunately I won't have my BJ8 handy for about a week to look and see
> what
> Pertronix is currently installed on it.
>
>
>
> Does anyone know the difference between the 2 Pertronix units and would
> they
> please advise me which one to buy for my application?
>
>
>
> Thanks!
>
> -Dave Murphy, 66 BJ8
>
> Dearborn Micigan
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|