Re: [Healeys] Another con - fused question

[john spaur <jmsdarch@sbcglobal.net> mail.com>]

If I understand you correctly the fuse needs to be placed between 
terminal A3 (which is one side of an existing fuse) and C1 on the 
overdrive relay. Correct?

David Nock stated the white wire needs to be protected but I think he 
may have meant the white with green wire coming off for terminal C2 
on the OD relay because the relay should be protected at A3 on the fuse block.

John

At 11:03 AM 1/1/2013 -0800, Richard Ewald wrote:
>Only items downstream from the fuse will be protected by that 
>fuse.  So if you put the fuse downstream of the relay, the relay 
>won't be covered.  If you put it upstream on the relay the relay 
>will be protected.
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys