I have first used moly grease then switched to anti-sieze, my observtions:
1. I went to the anti-sieze because it didn't tend to leach out onto the
spokes on long hot trips and make a mess like the grease did.
2. I have always whacked my knock-offs on pretty hard, not to start that
discussion again, but will say I never had any trouble getting the wheel off
(or knock off) with either grease or anti-seize, did have trouble when I
first bought cars and they had not had the wheels off for a long time and or
some sort of lubricant/protectant had not been used.
3. What's the secret to getting grease stains out of your t-shirts?, I get
rings that won't come out from either one. I can get out oil stains if the
oil wasn't to dirty to start with, but whatever I have had on the splines
was always pretty much permanent.
Greg Lemon
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|