Quote from the Archives:
The 3000 - 100/6 engine mounts are handed - they are marked either LH or
RH.
There is a time period where the mounts were made with slotted holes so that
they could be used on either the right or the left hand side. I do not know
when these slotted versions were made, but they are very apparent to the
eye.
Perhaps they were the solution to people not realizing the handed properties
of the mounts and installing them incorrectly. It is not readily apparent
that
the /handed mounts are different.
Unquote
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of john spaur
Sent: Saturday, January 07, 2012 10:34 PM
To: healeys@autox.team.net
Subject: [Healeys] Motor mounts
Is there really any difference between the right and left hand engine mounts
or are my eyes going bad?
When I check the part numbers in the '62 BT7 parts book the part of the
mount that bolts to the engine then to the mount has a left and right part
number. Looking at them they seem the same except for the LH and RH
stampings.
John Spaur
'62 MKII
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ahbn6@verizon.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|