healeys
[Top] [All Lists]

Re: [Healeys] wrench for oil drain

To: Richard Kahn <tahoehealey@hotmail.com>, healeys@autox.team.net
Subject: Re: [Healeys] wrench for oil drain
From: Alan Seigrist <healey.nut@gmail.com>
Date: Wed, 7 Dec 2011 19:26:05 +0800
Rich -

Are you sure?  I always get in there with a socket no problemo.

You should use a 6 sided socket on a chewed up plug, or a Metrinch
socket if they make one big enough.

Alan

On 12/7/11, Richard Kahn <tahoehealey@hotmail.com> wrote:
> I have been chewing up the oil drain plugs using an adjustable wrench. I
> cannot find a box end wrench that fits. A 28 mm is too large as is a 1 1/16
> on
> my chewed up old plug. There is little room for a socket wrench when the car
> is only up on jack stands. What are all of you using?
> Thanks
> Richard Kahn
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>