Delta Cams does this service if you can't find someone locally, they are
very reasonable, have quick turnaround, and I have had them do a couple sets
for me with no problems. http://deltacam.com/
Greg Lemon
----- Original Message -----
From: "Alan Seigrist" <healey.nut@gmail.com>
To: "Mark LaPierre" <lapierrem@sbcglobal.net>
Cc: <healeys@autox.team.net>
Sent: Monday, May 30, 2011 10:48 PM
Subject: Re: [Healeys] Tappets,or Lifter wear
> Regrinding Tappets is normal. Give it to the Machine shop and let them
> tell
> you if they are salvageable or not. One advantage is you will know that
> they will grind it with the correct surface that causes these to rotate
> slightly when moving... sometimes the manufacturers screw this up and the
> tappets wear.
>
> Cheers,
>
> Alan
>
> On Tue, May 31, 2011 at 10:50 AM, Mark LaPierre
> <lapierrem@sbcglobal.net>wrote:
>
>> I have 3 tappets in my 4 cylinder MGA with a few pit marks. Can these be
>> gently polished back to a smooth service (machine shop) and reused till
>> I
>> want to get a full set, or do I need to purchase three new tappets now.
>> The
>> cam lobes do not show any noticeable wear in these areas and the other
>> tappets
>> are smooth.
>>
>> What say you class?
>>
>> Mark
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/glemon@neb.rr.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|