Jose,
Could it be you installed the oil filter adapter 1800 wrong? Then the oil
channels are blocked.
Josef Eckert
Konigswinter/Germany
-----Urspr|ngliche Nachricht-----
Von: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net] Im
Auftrag von Jose Vicente Vargas
Gesendet: Montag, 23. Mai 2011 13:29
An: Oudesluys
Cc: healeys@autox.team.net
Betreff: [Healeys] Latest news: Bn2 excessive oil pressure
Last night I changed the gauge: same results I removed the spring and relieve
valve, no metal debris, cleaned it and reinstalled it: same results Tonigth I
am going to pump air through the valve relieve hole into the oil system, after
removing the oil filter and gauge: good or bad idea ?
I am considering changing the oil: any logic on that ?
Thanks,
Jose
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|