Alex, I used a set from Moss for my BT7. They look like a great copy but
they need to strengthen their stud welds. I had 2 of the studs come loose
just from moving the seats
around a bit when I was installing them. I suggest either an extra tack
weld on each stud
or you can reinstall the loss ones with an extra nut to hold it in place,
kind of a pita to get
them on but thats how I fixed my issue. Other than that they work fine.
Mark
----- Original Message -----
From: "Alex Hope" <seven3four@hotmail.com>
To: <healeys@autox.team.net>
Sent: Monday, May 02, 2011 11:29 PM
Subject: [Healeys] Reproduction seat runners
> I'd be interested to know of people's experience with reproductin seat
> runers.
> Are they all the same ? Are they good quality or rubbish ? Are they good
> value at about $100 per seat ?
>
> I have the capacity to rebuild the existing ones by welding in new studs,
> re-plating and re-assembling with new bearing balls but that's a lot of
> work
> and extra time off the road compared to fitting replacements.
>
> Alex Hope
> Australia
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|