[Healeys] BN2 80/100 W bulbs on the PL700 tripod headlights....

[coudesluijs at chello.nl (Oudesluys)]

I prefer to use lowish loads on the relays for better reliability. They 
cost next to nothing. The 50A fuse may be a bit to heavy, you are 
correct, but 20A is a bit tight as you have a surge when switching on 
the lights as the filaments heat up. I settle for 30A total or 15A per 
relay.
High beam usually is 80A,dip light 100A.
Kees Oudesluijs

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
coudesluijs.vcf]