Norman, I use the blocks in conjunction with my hydraulic jack and multiple
jack stands.
== Alex in Maine
"The Blue Mainie," 1960 Austin Healey 3000 BT7
"Conkling," 1946 MG TC #1321
Former owner 1957 A-H 100-6, 1967 A-H BJ8,
1965 MG Midget
http://home.roadrunner.com/~alexmm
----- Original Message -----
From: Norman Nock
To: healeys@autox.team.net
Cc: Alex
Sent: Saturday, December 05, 2009 2:04 PM
Subject: wood block stands
You forget the car is in gear and you crank the engine , your car will be
off those
wood blocks VERY quick ... now you have a big problem . Norman Nock
--- On Sat, 12/5/09, Alex <alexmm@roadrunner.com> wrote:
From: Alex <alexmm@roadrunner.com>
Subject: Re: [Healeys] Harbor Freight Jacks
To: "Pieter and Linda" <pieters@pt.lu>, "Mark LaPierre"
<lapierrem@sbcglobal.net>
Cc: "Steve Gerow" <steveg@abrazosdata.com>, healeys@autox.team.net
Date: Saturday, December 5, 2009, 6:14 AM
Solid hardwood blocks are also useful to ensure safety. They can often be
obtained from boatyards. Mine are about 2-ft long and 10 inches square.
It's easy to place them at strategic points.
== Alex in Maine
[demime found a multipart/alternative section which it tried
to parse but could not find any section which it could render. Please send
plain text.]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|