healeys
[Top] [All Lists]

Re: [Healeys] BJ8 Turn signal mechanism question

To: Alan Seigrist <healey.nut@gmail.com>
Subject: Re: [Healeys] BJ8 Turn signal mechanism question
From: John Harper <ah@jharper.demon.co.uk>
Date: Sat, 17 Oct 2009 14:43:00 +0100
Alan

Sorry but I believe that this needs further clarification. So long as we 
are describing the same part and the fixed steering wheel later cars 
this WAS the type of ring used on A-H 100.

There were, at this time and earlier, other cars fitted with this same 
style ring but in some cases such as early 1950s Austin saloons they 
were wider so one has to be a little careful here. Early post war and 
pre war Austins did use the same ring as the 100 as did many other cars 
around this period.

The Lucas part number is 324734 and is described as a Striker Ring. The 
BMC part number is 7H 5471

Regards

>
>Various Austins had a pot metal cancelling ring with a little bump on
>the inside of the ring - this is not correct for an Austin Healey.
>
-- 
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>