Rich Chrysler wrote:
"Brake squeal is simply a high frequency vibration of the pad against the
piston. If this can be interrupted by a shim (usually but not always works).
Any sort of grease or other substance between the parts will dampen the
vibration. If shims don't stop the squeal, a high temp. silicone grease
smeared lightly between the parts will do it."
I've used duct tape on the back of the pads. Spray gasket, works, too.
--
Steve Gerow
Pasadena, CA, USA
BN6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|