healeys
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Healeys] Bodywork Advise on "Oil Canning"

from [john spaur] [Permanent Link][Original]
To: "Mark LaPierre" <lapierrem@sbcglobal.net>
Subject: Re: [Healeys] Bodywork Advise on "Oil Canning"
From: john spaur <jmsdarch@sbcglobal.net>
Date: Mon, 29 Jun 2009 19:46:03 -0700 
Mark,

Check this website:

http://metalshapers.org/tips/

Ron Covell has a CD and VCR tape with very useful information on 
metal work including shrinking with a shrinking hammer (not 
recommended by me because it dimples the metal) and heat shrinking.

John

At 08:27 PM 6/26/2009 -0400, Mark LaPierre wrote:
>One of my front fenders has an "oil canning" dent that needs some attention.
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Healeys] Beaulieu Autojumble - September (spousal alternative), Geoff Muttart
Next by Date:  [Healeys] trafficator, healeymanjim
Previous by Thread:  Re: [Healeys] Bodywork Advise on "Oil Canning", caddi5
Next by Thread:  Re: [Healeys] Interior redo was conclave, Mark LaPierre
Indexes:  [Date] [Thread] [Top] [All Lists]