Hard to diagnose based on the limited info, but sounds like two separate
problems.
IIRC, when pressed the horn button grounds the circuit to the horns. Since
they're not working, I suspect the circuit to ground is open or broken, which
may or may not have something to do with the flasher problem.
Bob
----- Original Message -----
From: "Bob Johnson" <bjsbj8@gmail.com>
To: "john doe" <rccpl1@yahoo.com>
Cc: Healeys@autox.team.net
Sent: Monday, June 29, 2009 10:44:57 AM GMT -08:00 US/Canada Pacific
Subject: Re: [Healeys] trafficator
Are you saying that when you move the trafficator to a right or left
turn that after you complete the turn the signal does not get
canceled? If so, it could be the way that the screws that hold the
steering wheel on may need to be adjusted. At least that seems to be
what fixed my non-canceling problem. Also, just make sure that you
have the cancellation pegs on the proper sides of the assembly. IMHO,
the right way looks wrong, but it isn't.
Bob Johnson
BJ8
On Sun, Jun 28, 2009 at 5:14 PM, john doe<rccpl1@yahoo.com> wrote:
> had to repair the small stator tube because it broke off now after installing
>it can't get the horn to work and when i connect the side markers they just
>keep flashing ant advice
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|