Probably a leaking brake servo seal or membrane, depending on type of
servo or perhaps the one way valve that is connected to the vacuum tube
from the manifold.
Kees Oudesluijs
NL
Bill B schreef:
> hello fellow Healeyites:
> still having brake servo problems
> on a bj8, when i apply brake pedal pressure, the engine turns increase by
> 500 rpms... hear a "hissing" sound coming from the servo...seems to brake
> ok, but this rpm thing can't be...
>
> any suggestions?
>
> thanks in advance,
> Bill Browning
> Charlotte
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.339 / Virus Database: 270.12.55/2160 - Release Date: 06/07/09
>05:53:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|