healeys
[Top] [All Lists]

Re: [Healeys] Windshield Frame to Body Seal (Moss terminology)

To: Jack Feldman <qualitas.jack@gmail.com>
Subject: Re: [Healeys] Windshield Frame to Body Seal (Moss terminology)
From: Charlie Baldwin <mgcharlie@comcast.net>
Date: Tue, 26 May 2009 17:06:57 -0400
Jack,
You can actually leave the pillars on the car and remove the frame and 
windshield from between them.  Remove the 4 10-24 pan head screws on 
each side and it will pull out.  It is a bit hard to keep from chipping 
the paint, but it will work.  It is best to have a helper.  Your other 
problem will be where to cut the seal, but if you keep it a bit long and 
then recut on the car, it should work.  You will need a drift to force 
the windshield down and in place while you put the screws back in.
Charlie

Jack Feldman wrote:
> The seal on my BT7 is all chewed up and needs to be replaced. Is there an
> easy way to do this?
>
> Does it require both pillars to be removed to get the windscreen to elevate
> for the seal to be placed?
>
> Thanks,
>
> Jack
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgcharlie@comcast.net
>
> http://www.team.net/archive

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
mgcharlie.vcf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>