Not sure if I understand what you are trying to do.
Are you trying to:
A) If input is on output #1 is on, or if input is off, output #2 is on (one
input, two outputs)
Or
B) If input #1 is on, output is on, and/or if output #2 is on then output is
on (two inputs one output)
Or
C) ???
A is no problem, B is only slightly harder, C is in the I have no idea area.
Rick
On Tue, Feb 17, 2009 at 5:41 PM, Alan Seigrist <healey.nut@gmail.com> wrote:
> To the electrically minded -
>
> I would like to create an "OR" circuit (i.e. OR gate) using standard
> automotive relays (or similar equipment), basically if one or another input
> is on, or both, then the output wire is on. Maybe if I'm lucky someone
> knows of an off the shelf OR relay I can buy?
>
> Any suggestions on how this is easily or simply achieved?
>
> Thanks,
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richard.ewald@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|