healeys
[Top] [All Lists]

Re: [Healeys] crankshaft bearings - what make to look for?

To: "'Simon Lachlan'" <simon.lachlan@homecall.co.uk>, "'Charlie Frazer'"
Subject: Re: [Healeys] crankshaft bearings - what make to look for?
From: Bob Spidell <bspidell@comcast.net>
Date: Thu, 12 Feb 2009 05:27:44 -0800
Well, I immediately had to Google 'Vandervell,' and came across this bit 
of trivia, which I thought interesting:

http://en.wikipedia.org/wiki/Tony_Vandervell


Bob


Alan Seigrist wrote:
> Tadek -
>
> Unfortunately, the Isreali company "County" has basically under priced
> everyone else out of the AH bearing business, probably in the last 5 years,
> and now it is next to impossible to get decent bearings for the Healey 100.
> County bearings are single metal tin bearings, and several racers have
> complained that they only last maybe two races before needing replacement.
> Other daily driver users have complained about these bearings as well.
>
> The best bearings, by far (that were available until only a couple of years
> ago) were Vandervell bearings.  They are tri-metal layered bearings and will
> easily last the lifetime of your car (if you maintain the engine properly).
> If you are lucky, you may be able to find some old stock if you shop around
> a bit.
>
> You can also try some of the race shops, like Dennis Welch,
> Cape-International or possibly British Car Specialists (in California) and
> see if they have any ideas.
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
>
>
>   
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net

Failure is the opportunity to begin again more intelligently. - 
Henry Ford
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>