Does anybody have a steering box mounting bracket spacer that they'd be
willing to part with? It is BMC part 1B6195, Moss part 667-790. I know I can
buy it new but wondered if somebody has a good used one that they'd want to
sell. Please contact me off-list.
I removed the steering column from my BT7 tricarb with great difficulty.
The nuts came off of the bolts at the steering box fine but the bolts would
not
come out. I soaked them in PB blaster, used a big hammer, air hammer, heat,
etc but nothing worked. After a couple of weeks of non-progress I finally
got out the sawzall and cut the bolts at both ends of the spacer bracket. It
turns out that the bolts had corroded and essentially welded themselves into
this bracket. Even with the bracket out I can't get the bolts out of it, and
it is cracked and missing a few pieces, not to mention being two sawzall
kerfs shorter than standard! I didn't have this problem with my BJ8 steering.
They came right out and cleaned up nicely. I'm not sure how common it is to
have these things seize up like this but it surprised the heck out of me!
Chuck Ott
Middletown, DE, USA
62BT7, 67BJ8, 69AN9
**************Get the scoop on last night's hottest shows and the live music
scene in your area - Check out TourTracker.com!
(http://www.tourtracker.com?NCID=aolmus00050000000112)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|