Charlie, et al,
Please red my note from this morning. I'm referring to the area at the back
of the seat cushion where it slopes down to meet the seat back. Extra
padding was used there to give the area more height and hide the back edge
clips, etc.
Rich
----- Original Message -----
From: "Charlie Baldwin" <mgcharlie@comcast.net>
To: "David Schweninger" <quenty@ntelos.net>
Cc: "Healey Mail List" <healeys@autox.team.net>
Sent: Tuesday, June 10, 2008 1:16 PM
Subject: Re: [Healeys] Seat pans
>I wonder if originally extra foam or other padding was added in this
> area. It's been a long time since I took the original seats on my 3000
> apart, but I don't recall any extra padding material there. The seat
> foam already has the area raised. I've seen some redone big Healey
> seats that look way too pillowy
> Can we get a ruling by the concours gurus as to what is correct?
> Thanks.
> Charlie
>
> David Schweninger wrote:
>> Hello Mark.
>> The Bolster is the area surrounding the pleated center area on both
>> the Seat and the Squab (seat back). It should be raised slightly both
>> for looks and comfort.
>> Best
>> Dave and Daisy
>>
>>
>> On Jun 10, 2008, at 6:58 AM, Mark LaPierre wrote:
>>
>>
>>> What is the bolster area that you are referring to.
>>>
>>> Thanks, Mark
>
> [demime 1.01d removed an attachment of type text/x-vcard which had a name
> of mgcharlie.vcf]
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|