Please post replies to the List; I'll be doing this myself eventually.
TIA,
bs
James Shope wrote:
> checked the archives but no luck. i am trying to determine the best way to
> remove the old shock tower plate on a bj7 which is kaputt. it is on the
> driver side and i assume you have to remove the steering gear. do you cold
> chisel or grind it off. i am also assuming the new shock plates have the
> captive nuts welded in already. we are going to have a mobile welding guy
> come by to weld the new plate. what do i need to tell him about making sure
> everything is in the exact place and how critical it is, etc.,
> healeymanjim
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bspidell@comcast.net
>
> http://www.team.net/archive
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|