healeys
[Top] [All Lists]

Re: [Healeys] Painting and fitting body panels

To: "Tom Simkins" <ah1006@verizon.net>, <healeys@autox.team.net>
Subject: Re: [Healeys] Painting and fitting body panels
From: "Rich C" <richchrysler@quickclic.net>
Date: Thu, 8 Nov 2007 20:31:08 -0500
Tom,

Yes, the outer panels are completely painted and finished off the car, then 
very carefully final assembled to the car.

I should point out that if the car is to be two toned, the lower portion of 
the panels are painted off the car, the panels are temporarily assembled to 
the car, the tape line is established, then the panels are removed, the 
balance of the lower portion is completely taped off and the uper portions 
are painted, again, individually off the car.

Rich Chrysler

From: "Tom Simkins" <ah1006@verizon.net>
Subject: Re: [Healeys] Painting and fitting body panels


> Rich,
>  Do you wet sand and buff the panels off of the chassis also prior to 
> assembly?
>  Thanks,
>  Tom
>
> Rich C <richchrysler@quickclic.net> wrote:
>   we have found the best method is to be carefully painting
> all panels inside and out off the car,
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>