I uploaded what I think is a better idea for a 2-seat roadster rear radius
arm than the BJ8-style setup I've already started to incorporate on my car.
It is adjustable, should be pretty cheap and uses the stock axle bump so as
not to reduce the already limited travel such as I've done on my setup. It
also incorporates a kink to avoid interference with the Putzke shock if
that's your setup.
Also uploaded are accurate drawings of the brackets and Mike Lempert's
machinist can probably CNC them, as he did mine.
http://www.pbase.com/stevegerow
See Healey Rear Supspension gallery
no passwords reqired
--
Steve Gerow
BN6
Pasadena, CA
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|