I use the N12Y's (I think that they are actually RN12YC - R = resistor, C=
copper). I have not checked recently, but all Champion plugs used to have
terminal which screwed on. You might want to check again to see if they are
just on very tight.
Peter Schauss
1963 BJ7
1980 MGB
> -----Original Message-----
> From: owner-healeys@Autox.Team.Net [mailto:owner-healeys@Autox.Team.Net]
> On Behalf Of Dan Serrao
> Sent: Monday, December 18, 2006 6:20 PM
> To: healeys@autox.team.net
> Subject: Spark Plugs
>
> Question to all:
> I have a 63 BJ7. When I got it last year it had Champion N11Y's.
> Everything I've read says N12Y's so that's what I installed. I just got a
> new spark plug wire set from the Nock's and the ends won't fit on the
> plugs. I talked with their parts guy and he said they always install
> N11Y's which have the screw off tips. Since the N12Y's don't have the
> screw off tips the plug wires won't work. What is everyone using?? TIA
>
> Merry Christmas to All
> Tired of spam? Yahoo! Mail has the best spam protection around
|