Jim,
The seal continues beyond the pillar and wraps around the back edge of the
fender by an inch or two. Not easy to get a good fit but that is the way it
goes. Guess it helps to shed water from the door seals.
Keith Pennell
> Is the seal from the windscreen to the shroud (BJ8) trimmed to just mate up
> with the pillar assembly on each side? The Service Parts manual appears to
> show it this way but it is not very clear.
>
> Thanks in advance.
>
> Best regards,
> Jim Hockert
> BJ8 Rallye
> Dallas, TX
|