Hi Ron,
Gosh, I was away from the keyboard for 24 hours and what a lot of traffic!!
I don't have a good picture of that area on your series of seat cushion.
However, I would point out that you may find you need that 1 1/2" at the
back of the cushion to provide adequate clearance for the seat back when it
all fits together as a final assembly.
I would try to temporarily assemble the components together and see what
your clearances are when the seat back and its foam is fitted too. Usually
with a new installation there is a bit of a "fighting fit" in that area.
Check it out and let me know.
Rich
----- Original Message -----
From: "Ron Fine" <RonFineEsq@earthlink.net>
To: <Healeys@autox.team.net>
Sent: Saturday, December 03, 2005 1:54 PM
Subject: Seats BN7
> Can anyone help me (Rich?) with some photos of the back end of the bottom
> seat cushion with leather seat secured to the pan?
> I bought Moss seat foam sets about 2 years ago on sale. Took them out of
> the box this weekend and it looks like the foam seat cushion is about two
> inches too short from front to back. Do these things shrink? I have new
> Moss leather seats. The Moss video doesn't help because they are
> installing
> vinyl seats in a BJ8 with different patterns, but their foam is clearly
> designed to cover the entire metal pan. My foam seat does not. If I push
> the foam forward where it looks like it should fit it is about 1 1/2 "
> short
> of the back of the metal seat pan. Any help is always appreciated.
> Ron Fine
> (BN7 waiting for seats to be back on the road)
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010041.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010083.JPG]
|