That's how mine is mounted too.
See the setup here:
http://www.ewilkins.com/wilko/overriders.htm
Rick (Wilko)
San Diego
On Feb 28, 2005, at 4:17 PM, WILLIAM B LAWRENCE wrote:
> When I did mine I welded the holes for the bumper brackets closed,
> used a
> stock license plate mount and mounted the lamp on the shroud. It does
> require drilling two holes for the lamp mounting, but the wire comes
> out in
> the same place. I modified a gasket to allow the wire to enter the
> lamp body
> since an original one would have blocked the hole.
>
> Bill Lawrence
|