Hello Kevin,
I noticed your request to the Healey list.
No seating barrier at all is used, however if you wish to increase the ride
height at the front you can "shim" with discs the same dia as the spring,
the distance will double, ie...half an inch spacer.equals one inch ride
height etc.
I also recommend that you fit at the top of the coil.
Hope this helps.
Regards.
David.
www.bighealey.ltd.uk
----- Original Message -----
From: "Kevin" <krogers@new.rr.com>
To: <healeys@autox.team.net>
Sent: Friday, February 25, 2005 4:25 PM
Subject: front spring installation
> Dear group.
>
> Before I install the front springs I would like to ask if there is any
type of
> barrier between the spring itself and the surface it contacts. it seems
that
> this metal to metal contact could cause noises and wear of the contact
area.
>
> Your opinions will be greatly appreciated
>
> Kevin R
> 60 BN7
|