healeys
[Top] [All Lists]

Re: Miss when warm

To: "Alan Schultz" <alan@andysnet.net>,
Subject: Re: Miss when warm
From: "Classic-Car-World Ltd" <enquiries@classic-car-world.co.uk>
Date: Sat, 26 Jun 2004 09:33:37 +0100
Hi, you might also wish to replace the condenser in the distributor. These
have been known to breakdown under heat and cause a miss fire.

Kindest regards

Tom
Tom McCay AH 3000 MkIII BJ8
Classic-Car-World Ltd
Tel: 01522 888178
Fax: 0870 7059115
E-mail: enquiries@classic-car-world.co.uk
URL: http://www.classic-car-world.co.uk

Now offering quality Sealey tools at discount prices, see
www.ccw-tools.co.uk for further details.
----- Original Message ----- 
From: "Alan Schultz" <alan@andysnet.net>
To: "Alain Giguhre" <agig@sympatico.ca>
Cc: <healeys@autox.team.net>
Sent: Saturday, June 26, 2004 12:17 AM
Subject: Re: Miss when warm


> Sounds lie the coil might be degrading with heat. A static test of the
> coil may not show a fault. I would suggest replacing the coil with a
> known good coil.
>
> Alan S
> HBJ8L/34297
>
> Alain Giguhre wrote:
>
> > I have a friend who has a BT 7 who is puzzled by  a miss developping
> > after the engine is warm. This occurs at around 3000 rpm it has been
> > getting worse and now is occuring at lower and lower rpms. He has
> > checked the carb floats (has plastic ones) they dont seem to stick. He
> > has done a static check on the coil. Any other ideas?





<Prev in Thread] Current Thread [Next in Thread>