Thanks for getting back to me Alan. I did use the beam to transfer the
applications but the runs that are still on the IIIC didn't
transfer. I think I'll try doing the transfer back the other way, from m125 to
IIIC, to see if I can get the data to go that way.
Anyone using a serial-to-usb hotsync cable to download runs to a computer?
Best Regards,
Patrick Fisher
Global Infrastructure Solutions
Distributed Systems Support - Unix
Phone: +1 480 441 0626
Cell: +1 602 616 2684
Pager: +1 800 759 8352 Pin: 1193002
Email: patrick.fisher@motorola.com <mailto:patrick.fisher@motorola.com>
-----Original Message-----
From: PbPied@aol.com [mailto:PbPied@aol.com]
Sent: Tuesday, January 21, 2003 4:47 PM
To: Patrick Fisher; geez@autox.team.net
Subject: Re: Need help with M125 and Belkin hotsync cable.
I have beamed programming from one Palm to another,
specifically the GEEZ program. It should be possible to
use the IR beam to also transfer data?
Alan
In a message dated 1/21/03 3:32:25 PM Pacific Standard Time,
Patrick.Fisher@motorola.com writes:
All,
Need a little help here. I've switched from a Palm IIIc to a M125 and
now I can't download my run data to my Win2000 laptop. I haven't changed
any hardware settings or anything on the laptop. Just switched to the
M125 and I'm using a Belken brand hotsync cable. One end of the cable
is double-ended with both serial and a USB connectors. Geez and the
download utility cannot establish a connection. It doesn't matter if I
try the serial or the USB connections, no luck either way. Help!!
Is there a way to transfer the run data to my IIIc so I can download
from there? Everyone feel free to brainstorm out loud as I really don't
want to lose the data I just recorded on the M125.
PFisher
Arizona Region SCCA
/// Archives at http://www.team.net/archive
/// Check http://www.team.net/mailman/listinfo for other lists of interest.
|